Facebook-icon-small
Highpoint Deck Lighting
Enriching outdoor living through design!

Installation

Installing HighPoint Deck Lights is made simple by following our step by step instructions (see links below). Installing our lights will require the use of these basic tools which may differ depending on the fixture chosen; drill, 3/8” drill bit, 3” Fostner/hole saw, tape measure, writing instrument, silicone filled wire nuts, low voltage wire, Flathead and Philips screw drivers, insulated wire tacks. You can find a specific list of tools needed for your fixture on the links below. If you have any questions during your install, please do not hesitate to contact us at: 888-582-5850.

Install Guides

Highpoint Deck & Landscape Lighting | phone: (888) 582-5850 | fax: (303) 582-5091 | Contact Us
©2017 Highpoint Deck & Landscape Lighting All Rights Reserved. All information subject to change.